Samsung Galaxy Tab S2 - Activate Your Device; Charge the Battery

Activate Your Device
Charge the Battery
Your device’s battery should have enough charge to
get started, but it’s a good idea to charge it fully
before you get going. Insert the USB connector into
the charger/accessory port. Plug the other end of
the USB cable into the AC adapter and plug the AC
adapter into an electrical outlet.
Before turning on your device:
If you purchased your device at a Sprint
Store, it is probably activated and ready
to use.
If you received your device in the mail, and
it is for a new Sprint account or a new line
of service, your device is designed to
activate automatically when you irst turn
it on. You will see a Hands Free Activation
screen at startup. When it’s inished, tap
OK to continue. To conirm your activation,
launch the Web browser.
If you received your device in the mail and
it is going to be activated on an existing
number (you’re swapping devices), go
to sprint.com/activate and follow the
instructions. When you have inished,
launch the Web browser to conirm
your activation.
If your device is still not activated, visit
sprint.com/support for assistance. If you do not
have access to the Internet, call Sprint Customer
Service at 1-888-211-4727.