Samsung Galaxy Tab S2 - Page 222

Settings 214
2.
TapBluetooth .
TheBluetoothsettingsopen.
Bluetooth Settings Operations
n Enable Bluetooth:InBluetoothsettings,tapON/OFFtoenable.
l Whenenabled,confirmationappearsforyourtablettobediscoverablebyotherdevices.
Followtheonscreeninstructions.
n Pairing Bluetooth Devices:Makesuretheotherdevicesaresettobediscovered.From
Bluetoothsettings,tapthedevicenamein“Availabledevices”andfollowtheonscreen
instructions.
l Dependingonthedevice,youmayberequiredtoenteroracceptapasskey.
l Ifthetargetdevicedoesnotappear,tapScan tosearchagain.
l ThissettingisavailablewhenBluetoothisenabled.
n
Change the Name of a Paired Device:FromBluetoothsettings,tapSettings nexttoa
paireddevicename,tapRename,enteranewname,andtapRename.
l Emojicannotbeusedinadevicename.
l ThissettingisavailablewhenBluetoothisenabled.
n
Cancelling Pairing:FromBluetoothsettings,tapSettings nexttoapaireddevicename,
andthentapUnpair.