Samsung Galaxy Tab S3 - S Pen; Finger Scanner

Turn Your Device On and Off
◆ Press and hold the Power/Lock key to turn On.
◆ Press and hold the Power/Lock key to turn Off.
Initial Device Configuration
1. Select a language and tap START or tap ACCESSIBILITY.
2. Follow the prompts to complete the set up process.
Lock and Unlock Your Device
To lock your device screen:
◆ Press Power/Lock key.
To unlock your device from the lock screen:
◆ Press Power/Lock key then swipe your finger across the screen.
Connect to Wi-Fi and Bluetooth
Connect to Wi-Fi
1. From the Home screen, tap Apps
g
Settings
g
Connections
g
Wi-Fi.
2. Tap to turn Wi-Fi On.
3. Tap a Wi-Fi connection from the list, enter a password if applicable, and
then tap Connect.
Connect to Bluetooth
1. From the Home screen, tap Apps
g
Settings
g
Connections
g
Bluetooth.
2. Tap to turn Bluetooth On. If necessary, tap Scan.
3. Tap a device from the list to initiate pairing. The devices automatically pair
once the external device accepts the connection.
Install an optional microSD (not included)
Your device supports a removable microSD™ card for storage of music, photos and
other les.
1. Locate the microSD card tray.
2. Use the microSD removal tool that came
with your device to open the tray.
3. Carefully place the microSD card into the
tray and close.