Basics
15
Charging the S Pen
The S Pen must be charged before you can control apps remotely by using the S Pen button.
When the S Pen and the S Pen charger are properly aligned, charging will begin.
If the Air action feature is deactivated, the S Pen is only charged while the device is being
charged.
►
SM-T870, SM-T875:
►
SM-T970, SM-T975, SM-T976B:
•
If magnets are around the device, the S Pen may not be able to properly perform
some actions, such as charging or tapping the touchscreen.
•
Even if the S Pen has been fully discharged, you can use other S Pen features, such
as tapping the touchscreen or the Air command features.
•
If the device and the S Pen are not attached like in the image, the S Pen may not be
charged. Attach the S Pen by aligning the top of the S Pen to the end of the S Pen
charger as shown in the image.
•
If you use the device on the floor with the S Pen attached to the S Pen charger, it
may scratch the S Pen.
To Next Page
Loading...
