Samsung Galaxy TAB4 - Page 88

Manually Add a New Network Connection
1. From a Home screen, touch Apps  Settings

Connections  Wi-Fi .
2. Touch
Add Wi-Fi network .
3. Enter the
Network SSID . This is the name of your
Wireless Access Point.
4. Touch the
Security field and select a security option.
This must match the current security setting on your
target WAP.
5. If secured, you will also need to enter your WAP’s
password.
6. Touch
Show advanced options , if you need to add
advanced options such as Proxy settings, IP settings,
or Key management.
7. Touch
Connect to store the new information and
connect to your target WAP.
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
Turning Wi-Fi Off
1. From a Home screen, touch Apps  Settings

Connections  Wi-Fi .
2. Touch the
OFF / ON button to turn Wi-Fi OFF
OFFOFF
.
Note: Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery and
reduce your use times.
Manually Scan for a Wi-Fi Network
1. From a Home screen, touch Apps  Settings

Connections  Wi-Fi .
2. Touch
Scan .
All available Wi-Fi networks are displayed.
83