Getting started
16
Nano-SIM card and eSIM
Insert the SIM or USIM card provided by your carrier.
To have two phone numbers or carriers for a single device, activate the eSIM. Differing
from a physical nano-SIM card, an eSIM is an embedded digital SIM. Using both the
nano-SIM card and the eSIM may result in slower data transfer speeds in some areas.
•
eSIM may not be available depending on the region, carrier, or model.
•
Some services that require a network connection may not be available
depending on the carrier.
Inserting the SIM or USIM card
1 Insert the ejection pin into the hole on the tray to loosen the tray.
2 Pull the tray gently from the tray slot.
3 Place the SIM or USIM card on the tray with the gold-coloured contacts facing
downwards and gently press the SIM or USIM card into the tray to secure it.
4 Insert the tray back into the tray slot.
•
Use only a nano-SIM card.
•
Use caution not to lose or let others use the SIM or USIM card. Samsung is not
responsible for any damages or inconveniences caused by lost or stolen cards.
•
Ensure that the ejection pin is perpendicular to the hole. Otherwise, the device
may be damaged.
•
If the card is not fixed firmly into the tray, the SIM card may fall out of the tray.
•
If you insert the tray into your device while the tray is wet, your device may be
damaged. Always make sure the tray is dry.
•
Fully insert the tray into the tray slot to prevent liquid from entering your device.
To Next Page
Loading...
