Samsung GT-I9082 - Developer options

Settings
114
•
Enhance web accessibility : Set applications to install web scripts to make their web
content more accessible.
•
Sound balance : Adjust the sound balance when using a dual headset.
•
Mono audio : Enable mono sound when listening to audio with one earbud.
•
Turn off all sounds : Mute all device sounds.
•
Tap and hold delay : Set the recognition time for tapping and holding the screen.
Developer options
Change the settings for application development.
•
Desktop backup password : Set a password to secure your backup data.
•
Stay awake : Set the screen to remain on while you are charging the battery.
•
Protect SD card : Set to request a confirmation when reading data from a memory card.
•
USB debugging : Activate USB debugging mode to connect your device to a computer
with a USB cable.
•
Allow mock locations : Allow mock locations and service information to be sent to a
Location Manager service for testing.
•
Select debug app : Select applications to debug and prevent errors when you pause
debugging.
•
Wait for debugger : Set to prevent the selected application from loading until the
debugger is ready.
•
Show touches : Set to show the pointer when you touch the screen.
•
Show pointer location : Set to show the coordinates and traces of the pointer when you
touch the screen.
•
Show layout boundaries : Set to show boundaries.
•
Show GPU view updates : Set to flash areas of the screen when they are updated with
the GPU.
•
Show screen updates : Set to flash areas of the screen when they are updated.
•
Window animation scale : Select a speed for opening and closing pop-up windows.