SAMSUNG Proprietary-Contents may change without notice
11.
Disassembly and Assembly Instructions
11-1
This Document can not be used without Samsung's authorization
1)
Be careful not to make scratch and molding damage!
1)
Be careful not to make scratch and molding damage!
2)
Be careful not to damage IF COVER
1)
Be careful not to make scratch and molding damage!
2)
Be careful FPCB damage when disassemble volume
key
1)
Be careful not to make scratch and molding damage!
11-1.
Disassembly
Unscrew
6
points at the REAR case
1 2
3
lift up PBA after disassemble
1
→
4
sequence
Disassemble the Keypad
4
Disassemble the REAR as below sequence
*
Disassemble HOOK
after pulling FRONT to
side
To Next Page
Loading...
