ŝ50Ş
Using the Built-in Flash
1. Press the button.
The Fn menu appears.
2. Press the four-way controller (ƌ).
The flash options screen appears.
3. Use the four-way controller (ȜȞ) to choose a flash mode.
4. Press the button. The screen returns to the Fn menu.
The camera is ready to take a picture.
5. Press the Fn button. The camera is ready to take a picture.
1. Set the mode dial to , , , or .
ſ The flash is deactivated when (Night Scene), (Sunset), (Candlelight) or
(Museum) is selected in (Scene) mode.
2. Press the shutter release button halfway.
The built-in flash pops up if necessary and begins charging.
When the flash is fully charged, appears in the LCD panel and
viewfinder. (p.14 ~ p.20)
Selecting Flash Mode
Using Auto Discharge , (Automatic Flash Popup)
ƃ When the mode dial is set to , , , or , and appear gray and cannot be
selected.
INFORMATION
Exit
OK
Flash Mode
Auto discharge
To Next Page
Loading...
