Samsung GX-1L - Printing All Images

ŝ88Ş
Printing Using PictBridge
9. Use the four-way controller (ƊƌȜȞ) to choose the paper size.
You can only choose a size that is supported by your printer.
When the Paper Size is set to [Standard], images are printed
according to the printer settings.
OK
10. Press the button.
11. [Repeat Steps 8 to 10 to set [Paper Type], [Quality] and [Border Status].
The print settings change screen appears after each item has been set.
When the Paper Size is set to [Standard], images are printed according to the printer settings.
- [Paper Type] : (Best), (Better), (Good)
- [Quality] : (Super fine), (fine), (Normal)
12. Press the button twice.
The image is printed according to the settings.
Press the button to cancel printing.
1. Use the four-way controller (Ɗƌ) to select [Print All] on
the PictBridge menu.
OK
2. Press the button.
The Print all images screen appears.
Printing All Images
Paper Size
Standard
Card
L
100x150
Postcard
4" x 6"
2L
8" x 10"
A4
Letter
11" x 17"
A3
Cancel OK
Select printing mode
Print One
Print All
DPOF AUTOPRINT
OK