32
English
No
Hotel TV Function
Description
Category Item initial value
14
REACH
Solution
REACH 3.0 OFF
• ON: Open the REACH 3.0
• OFF:Closed the REACH 3.0
REACH 2.0 OFF
• ON: Open the REACH 2.0
• OFF:Closed the REACH 2.0
REACH Channel …
Select SIRCH Update Channel
Group ID …
Select the SIRCH Group ID
Ticker …
• On: The TICKER contents is displayed.
• Off: The TICKER contents is not displayed.
REACH Update Time …
Select the SIRCH update Time. In the SIRCH update time , you have the
option to perform an automatic upgrade at 12:00 AM/PM or at 2:00 AM/
PM. You can perform hourly upgrades at an interval of either 1 hr or 2 hrs.
REACH Update
Immediate
…
• On : Whenever the TV enters Standby mode, always performs the
SIRCH Update.
• Off : Only performs the SIRCH Update at the selected SIRCH Update
Time
Room Number …
Edit the room number
REACH 2.0 TV Sound …
• On: The TV sound in the current TV source is output continuously even
though the REACH 2.0 TV menu is displayed.
• Off: The TV sound in the current TV source is stopped when the REACH
2.0 TV menu is displayed.
REACH 2.0 Server
Version
…
Display the version of the SIRCH Clone file currently updated on the TV.
15 Security
Password Input …
Input Password 00000000.
Password Setting …
Set new Password.
Password Reset …
Reset Password to 00000000.
Security Mode …
Security Mode ON or OFF.
USB …
USB Disable or Enable.
HDMI …
HDMI Disable or Enable.
TTX Security …
TTX function Enable or disable
16 System
Self Diagnosis for TV …
Enter the Self Diagnosis Menu.
• Picture Test: Use this to check for picture problems. If the problem
appears in the test picture, select Yes and follow the directions on the
screen.
• Sound Test: Use the built-in melody sound to check for sound prob-
lems. If the problem occurs during the test, select Yes and follow the
directions on the screen.
Self Diagnosis for HTV …
This lets you check the state of the Variable audio out and the
communication with the SI STB or SBB. If you encounter any problems in
the variable audio out feature or communication with the SI STB or SBB,
please check this items.
SW Update …
SW USB Update function
Service Pattern OFF
Display the Service pattern.
Sound Bar Out OFF
An external device such as a Samsung Sound Bar can be connected
to the TV via an Anynet Connection and the TV Sound can be routed to
the Sound Bar Device. If the feature is OFF in the Hotel Factory Menu,
this functionality is disabled The main TV Speaker will be muted while the
Sound Bar option is ON and the Speaker is connected through HDMI.
TV reset …
Factory reset
✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional and interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER
contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are only avail-
able in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed in the
REACH server product for more information on operating it.
EU_Install Guide_ENG.indd 32 2014-04-14 10:22:42
To Next Page
Loading...
