Need help?Do you have a question about the Samsung HG28EE470AK and is the answer not in the manual?
General| Smart modes | Sports |
|---|---|
| Screen shape | Flat |
| Response time | - ms |
| Display diagonal | 28 \ |
| Display brightness | - cd/m² |
| Display resolution | 1366 x 768 pixels |
| Display technology | LED |
| Native aspect ratio | 16:9 |
| Peak luminance ratio | 68 % |
| Display diagonal (metric) | 70 cm |
| Picture processing technology | Samsung Wide Color Enhancer Plus |
| Supported graphics resolutions | 1360 x 768 (WXGA) |
| Motion interpolation technology | - |
| Dynamic contrast ratio marketing name | Mega Contrast |
| 3D | No |
| Annual energy consumption | 37 kWh |
| Audio decoders | DTS, Dolby Digital Plus |
| RMS rated power | 20 W |
| Number of speakers | 2 |
| Tuner type | Analog & digital |
| Digital signal format system | ATSC, DVB-C, DVB-S2, DVB-T, DVB-T2 |
| Product color | Black |
| Mercury content | 0 mg |
| Heavy metals free | Hg (mercury) |
| Number of OSD languages | 27 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 0 |
| Consumer Electronics Control (CEC) | Anynet+ |
| Common interface Plus (CI+) version | 1.3 |
| Cables included | AC |
| Remote control type | TM1240A |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 25 W |
| Package depth | 108 mm |
| Package width | 815 mm |
| Package height | 463 mm |
| Package weight | 5400 g |
| LYNK REACH version | 4.0 |
| Content management solution | Samsung LYNK REACH |
Weight and Dimensions| Depth (with stand) | 163.4 mm |
|---|---|
| Height (with stand) | 435 mm |
| Weight (with stand) | 4200 g |
| Depth (without stand) | 49.1 mm |
| Width (without stand) | 643.4 mm |
| Height (without stand) | 396.5 mm |
| Weight (without stand) | - g |
Essential safety, servicing, and ESD precautions to prevent damage and hazards.
Guidelines for servicing, including electrical safety and component handling.
Techniques to reduce component damage from static electricity.
Safety guidelines for product installation and handling.
Technical details and features for the LED TV models.
Comprehensive specifications including dimensions, weight, panel type, and features.
List of accessories included with the product package.
Detailed instructions for disassembling the LED TV components.
Checklist for verifying initial operation and identifying basic faults.
Guide to diagnose and resolve 'No Power' and 'No Video' issues.
Accessing and using factory mode for diagnostics and adjustments.
Instructions for upgrading Main SW and SubMicom firmware.
Steps to write EDID data for display compatibility.
Visual representation of connections between Main Board and SMPS.
Identification and pin map for main board connectors.
Description of functions for key connectors on the main board.
Details on main SMPS and source cables for different TV sizes.
To Next Page