4 ANT IN or AIR/CABLE
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver.
5 AUDIO OUT: Connects to the audio input jacks on an Amplifier/Home Theater.
6 DIGITAL AUDIO OUT (OPTICAL): Connects to a Digital Audio component.
7 DATA
– Used to support data communication between the TV and the external SBB or STB.
– Connects using an RJ-12 type of plug.
8 DVI AUDIO IN: Connects to the audio out jack of an external DVI device using a 1/8th inch stereo phone jack cable.
Some DVI devices may not or should not need this connection audio.
9 EX-LINK : Connect this jack to the jack on the optional RJP (Remote Jack Pack). The RJP allows you to connect external
devices (Camcoders, PCs, DVD players, etc) easily.
[HG670677-ZA]Install Guide-ENG.indd 10 2013-02-25 �� 2:19:18
To Next Page
Loading...
