26
English
¦ Plug & Play
Hotel Plug & Play is a function that automatically performs the Hotel mode selection, Country Setup, Clock Setup and Picture
mode Setup once.
– Hotel Plug & Play is available only one time when power is first turned ON.
– After setting up first TV and Clone TV to USB
– Next TV only needs to exit Hotel Plug & Play, connect USB, then Clone USB to TV.
If Standalone Only is selected
TV will enter the RF mode.
Standalone mode
is set.
If Standalone Plug & Play
is selected
Easy Set up
Next
After Plug & Play is
completed, TV will be set
to standalone mode.
Setup > Start
● Interactive
● Standalone Plug & Play
● Standalone Only
E
E
E
E
E
E
E
E
Select the language you want to use.
Next
Select English as the
menu language.
Setup > Menu Language
● Hrvatski
● Čeština
● Dansk
● Nederlands
● English
The next step is to set up a wireless network using an
internal LAN Adapter.
Next
Skip
Previous
Setup > Network Settings (1/5)
If you want to connect to your wired network, plug in a
network cable.
NOT connected
WIRED Network
Connected WIRED
Network
Network cable connected.
Press Next to configure your wired network settings.
Next
Skip
Previous
Setup > Network Settings (1/5)
If you want to connect to your wireless network,
unplug the network cable.
Next
WPS(PBC)
Skip
Previous
Refresh
Setup > Network Settings (2/5)
Select your wireless router from the list.
TEW-672GR_C4AEB0
HP
ureadymobile
ureadyintranet
setup
NINARICCI
E
E
<Depending on Region, this step may not exist.>
After Searching the channels.
Select Country.
Next
Previous
Set the country to United
Kingdom.
Setup > Country
● Serbia
● Slovakia
● Slovenia
● Switzerland
● United Kingdom
Let's find and store channels on your
TV. How do you receive programming?
Next
Skip
Previous
Selecting Aerial cable
means all the channels
available through your
RF cable will be stored.
(Auto Tuning
necessary)
Setup > Auto Tuning (1/5)
● I use an aerial cable.
● I use a cable or satellite service.
Set Auto Tuning search options.
Digital & Analogue Digital Analogue
Air
● ● ●
Cable
● ● ●
Next
Skip
Previous
Setup > Auto Tuning (2/5)
Set the Clock Mode.
Set the current time
automatically using the
time from the digital
broadcast.
Next
Skip
Previous
Setup > Clock (1/2)
● Auto
● Manual
Select Picture Mode.
Next
Previous
Setup > Picture Mode
● Dynamic
● Standard
settlite
Next
WPS(PBC)
Skip
Previous
Setup > Network Settings (4/5)
Enter security key.
*********0 11 entered
1
2
3
4 5 6 7 8 9 0 Del All
q w e r t y u i o p *
a s d f g h j k l ~ ?
z
Caps Shift Space
x c v
1
b n m . , @
^
!
Wired network connection failed.
Retry
Next
IP Settings
Previous
Setup > Network Setting (5/5)
IP auto setting failed. Try the following to set your IP address automati-
cally. Or set your IP address manually by selecting ‘IP Settings’.
-
Ensure DHCP server is enabled on router and unplug and re-plug-in the router.
-Contact your Internet Service Provider for more information.
MAC Address 00:40:30:31:78:01
IP Address 169.254.243.193
Subnet Mask 255.255.0.0
Gateway 0.0.0.0
DNS Server 0.0.0.0
SEC_LinkShare
IP Settings
IP Mode Auto
DNS Mode Auto
DNS Server 0 . 0 . 0 . 0
IP Address 0 . 0 . 0 . 0
Subnet Mask 0 . 0 . 0 . 0
Gateway 0 . 0 . 0 . 0
OK
R Return
[Hotel-XC]BN68-04282R-00Eng.indd 26 2012-03-29 오후 3:03:24
To Next Page
Loading...
