26
English
Menu Item initial Value Description
DRM
DRM Mode
OFF
:pro:idiom
OFF: Turns off CAS support.
LYNK DRM : Select to turn on S-LYNK DRM CAS support only.
Pro:idiom
models)
LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and Pro:Idiom CAS. (only
PI AES Data
PI AES Log OFF
PI AES Log consists of Pro:idiom AES diagnostic register, here after referred as AESD,
View PI AES Log …
System
Self Diagnosisfor TV
Lets you check the state of the TV picture and sound.
y Picture Test
picture, select YES, and then follow the directions on the screen.
y Sound Test
select YES, and then follow the directions on the screen.
Self Diagnosis for
HTV
Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB. If
with the SI STB or SBB, use this diagnosis function. If Pro:Idiom DTV Channel Key
Loss appears to have failed and the Pro:Idim encryption channel has failed to play
Vendor Setting appears to have failed and communication with the SI STB or SBB has
contact to Samsung Service.
.
Service Pattern OFF
Default
Gain
Default
Sound Bar Out OFF
y ON
connect the Sound Bar to hear the sound.
y OFF: Sound will come out through TV speakers normally.
Contact Samsung Samsung Contact information
ON
y ON
y OFF
TV Reset Returns all settings on the TV to their factory defaults.
✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER
only in stand-alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with
the REACH server product for more operating information.
✎ Security Mode highlight after input password.
Security Mode On, HMDI/USB/TTX function response will according which setting value.
To Next Page
Loading...
