EasyManua.ls Logo

Samsung HG55AD690U - Plug & Play OSD Options; Local Set Configuration

Samsung HG55AD690U
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
39
English
y Plug & Play OSD
Initial Highlight: Interactive
If Standalone Only button is selected, the Standalone hotel mode is set by default and “Standalone mode is set” OSD
is displayed for 3 seconds.
TV enters into RF mode automatically after displaying “Standalone mode is set” OSD for 3 seconds.
When Interactive mode is selected, Interactive Setup Menu is displayed. Press power off button to exit from
Interactive menu.
When Standalone Plug & Play mode is selected, “Select Menu Language” OSD is displayed.
y LocalSet
Initially highlighted: HKG_DTV
If you press the Enter key after selecting Change, you can change the country.
If the country is changed, the TV automatically turns off and on.
If you select the Interactive mode, the Interactive Setup Menu is displayed. Press the power off key to exit from the
Interactive menu.
If you select the incorrect country, execute TV Reset again after entering the Service section of the Hotel Menu.
y Select Menu Language OSD
If your select Standalone setup from "Easy Set up" OSD, "Select your Language" OSD is displayed.
Initially highlighted: 简体中文
Display time: OSD time out and operation are the same as Samsung's consumer TV models.
If you press the Enter key, the “Picture Mode” OSD appears
y Picture Mode OSD
Initially highlighted: Standard.
The TV displays the Picture Mode OSD where you can choose the Dynamic or a Standard Picture mode.
y Auto Search Mode OSD
If you press the Enter key, the TV automatically searches for channels.
The OSD Display time, which starts when the Auto Store operation is completed and continues until the Auto Sort
function starts, is 30 seconds.
y Set Clock Mode
Initially highlighted:
Clock Mode : Auto
If the TV will be tuned to digital broadcast channels, and these channels transmit date and time information, set the
Clock Mode to Auto. The TV will set the date and time automatically.
If the TV will not be tuned to digital broadcast channels, set the Clock Mode to Manual, and then set the date and
time on the TV manually.

Related product manuals