49
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment, such as
VCR, DVD, Set-Top Box, and the TV source (broadcast or cable).
Setting the Signal Source
1
Press the MENU button.
Press the ENTER button to select “Input”.
2
Press the ENTER button to select “Source List”.
3
Press the ▲ or ▼ button to select signal source, then
press the ENTER button.
4
Press the MENU button to exit.
Notes
•When you connect equipment to the TV, you can choose between the following sets of jacks:
AV, S-VIDEO, COMPONENT 1, COMPONENT 2, PC, or HDMI on the TV’s rear panel.
• HDMI input can only be selected when the external device is turned on.
➤
➤
Quick way to access viewing an external signal source :
Just press the “SOURCE” button on the remote control.
Source List : TV
√
Edit Name
√
Anynet
√
Input
TV
Move Enter Return
TV
AV :
----
S-Video :
----
Component 1 :
----
Component 2 :
----
PC :
----
HDMI :
----
Source List
TV
Move Enter Return
TV
AV :
----
S-Video :
----
Component 1 :
----
Component 2 :
----
PC :
----
HDMI :
----
Source List
TV
Move Enter Return
BN68-00835A-00(036~049) 4/6/05 8:22 PM Page 49
To Next Page
Loading...
