English 33
04 Basic Functions
Listening to Radio
Using buttons on the Remote Control
Press the FUNCTION button to select FM.
Tune in to the desired station.
Automatic Tuning 1 : When the # $ buttons is
pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the
TUNING (,,.) buttons to automatically search for
active broadcasting stations.
Manual Tuning : Press the TUNING (,,.) buttons
to increase or decrease the frequency incrementally.
Using buttons on the product
Press the FUNCTION
(
)
button to select
FM.
Select a broadcast station.
Automatic Tuning 1 : Press the STOP ( )
button to select PRESET and then press the
# $
buttons
to select the preset station.
Automatic Tuning 2 : Press the STOP ( )
button to select MANUAL and then press and
hold the
# $
buttons
to automatically
search the band.
Manual Tuning : Press the
STOP ( )
button
to select MANUAL
and then press the
# $
buttons
to tune in to a lower or higher
frequency.
Setting Mono/Stereo
Press the MO/ST button.
Each time the button is pressed, the
sound switches between STEREO and
MONO.
In a poor reception area, select MONO for a clear,
interference-free broadcast.
1.
2.
•
•
•
1.
2.
•
•
•
•
•
Presetting Stations
Example : Presetting FM 89.10 in the memory
Press the FUNCTION button to select FM.
Press the TUNING
(
,,.)
buttons
to select
<89.10>.
Press the TUNER MEMORY button.
Number fl ashes on the display.
Press the
# $
buttons
to select
preset number.
You can select between 1 and 15 presets.
Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before
number disappears from the display.
Number disappears from the display and the
station is stored in memory.
To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the # $
buttons
on the remote control to select a channel.
1.
2.
3.
•
4.
•
5.
•
•
6.
•
㪊
MO / ST
To Next Page
Loading...
