F/W Upgrade Method by USB flash drive
How
HowHow
How to
toto
to prepare
prepareprepare
prepare F/W
F/WF/W
F/W Update
UpdateUpdate
Update file
filefile
file via
viavia
via USB
USBUSB
USB flash
flashflash
flash drive
drivedrive
drive
1. Download the newest firmware file onto your computer from www.samsung.com.
2. If the firmware file is compressed (*.zip), the file should be uncompressed
3. Connect a USB flash drive to your computer.
4. If there are previous versions of firmware in the folder on USB flash drive,
delete them.
5. Copy the new folder to USB flash drive.
Warning
WarningWarning
Warning
The following events may interrupt the upgrade process and
MAY
MAYMAY
MAY RESULT
RESULTRESULT
RESULT IN
ININ
IN PERMANENT
PERMANENTPERMANENT
PERMANENT DAMAGE
DAMAGEDAMAGE
DAMAGE TO
TOTO
TO THE
THETHE
THE UNIT.
UNIT.UNIT.
UNIT.
1. Unplugging the power cord.
2.
Power
PowerPower
Power Outage.
Outage.Outage.
Outage.
How
HowHow
How to
toto
to upgrade
upgradeupgrade
upgrade the
thethe
the
HTS
HTSHTS
HTS
1. Insert the USB flash drive into the
HTS
while it is ON.
2. Select option in Setting. (Setting / Support / Software Upgrade / By USB)
3. Press [Enter] on the OK to upgrade firmware.
4. The upgrade progress bar will be appeared.
5. When the update is completed, HTS will be turned off automatically.
6. If the power turn on,
"
""
"HELLO"
HELLO"HELLO"
HELLO"
will appear on the front display.
7. In some cases,
"
""
"UPDATE"
UPDATE"UPDATE"
UPDATE"
will appear on the front display.
8. Then the HTS will be turned off once again and
then back on by itself automatically.
9. Home menu will be displayed.
10. Remove the USB flash drive.
Need help?
General
