Disc Playback
•
Depending on the content of the disc, the initial screen may
appear different.
•
Depending on the recording mode, some MP3-CDs cannot
be played.
•
Table of contents of a MP3-CD varies depending on the
MP3 track format recorded on the disc.
•
To resume playback, press PLAY/PAUSE ( )
button again.
1
Press OPEN/CLOSE button to
open the disc tray.
2
Load a discs.
3
Press OPEN/CLOSE button
to close the disc tray.
To temporarily pause playback,
press PLAY/PAUSE during playback.
DVD VCD CD
•
Playback starts automatically.
•
Place a disc gently into the tray with the
disc’s label facing up.
•
If pressed once, “PRESS PLAY” is displayed and the
stop position will be stored in memory. If PLAY/PAUSE
( ) button or ENTER button is pressed, playback
resumes from the stop position. (This function works
only with DVDs.)
•
If pressed twice, “STOP” is displayed, and if
PLAY/PAUSE ( ) button is pressed, playback
starts from the beginning.
To stop playback,
press STOP during playback.
Note
19
1p~38p(DS470)-GB 9/16/04 9:35 AM Page 22
To Next Page
Loading...
