Samsung HT-TWZ412 - Page 20

20
connections
4. Use a coin turn the hole cover clock wise
to fi x it. (Turning it counter-clock wise will
loosen from the hole.)
5. Use the wall mount hole (bracket) to install
the speaker on the wall.
5 5
4 4
To avoid accident fall and consequent damage to the customer and speaker, make sure
the speaker is hung safely.
M 
Installing the Wall Mount
<Front/Rear> <Center>
1. Insert the wall mount so that it fi ts into the
rear hole of the speaker as in the fi gure.
2. Turn the wall mount counter clockwise to
fi x it. (This is the reverse direction to the
cradle stand.)
3. Put the hole cover on the hole of the
speaker.
1 1
2 2
3 3
HT-WZ410(TWZ412)_XAA_0613.indd 20HT-WZ410(TWZ412)_XAA_0613.indd 20 2009-11-25  4:41:432009-11-25  4:41:43