62
system setup
ASC (Auto Sound Calibration) SETUP
By setting the ASC function just once when you relocate or install the unit, you can have the unit
automatically recognize the distance between speakers, levels between channels, and frequency
characteristics to create a 5.1-channel sound fi eld optimized for your environment.
ASC SETUP can be made when there is no disc in the unit, or it is in Stop mode with a
DVD/CD inserted.
Because the volume level of the tone is fi xed during the ASC setup, you cannot adjust the
volume using the volume control buttons.
If the auto sound microphone is disconnected during the ASC setup, the setup will be
cancelled.
When ASC function is activated, the DSP/EQ, DOLBY PRO LOGIC ll, and P. BASS sound
effects will not work.
To Verify the ASC
Briefl y press ASC button.
Distance and level values specifi ed for each channel will appear in the display.
M
•
L: FRONT SPEAKER (L)
R: FRONT SPEAKER (R)
C: CENTER SPEAKER
SW: SUBWOOFER
SL: REAR SPEAKER (L)
SR: REAR SPEAKER (R)
ASC
Microphone
HT-WZ410(TWZ412)_XAA_0613.indd 62HT-WZ410(TWZ412)_XAA_0613.indd 62 2009-11-25 4:42:122009-11-25 4:42:12
To Next Page
Loading...
