4. Use a coin turn the hole cover clock wise to fi x it. (Turning it counter-
clock wise will loosen from the hole.)
5. Use the wall mount hole (bracket) to install the speaker on the wall.
5
4
To avoid accident fall and consequent damage to the customer and speaker, make sure
the speaker is hung safely.
M `
Installing the Wall Mount
<Center>
1. Insert the wall mount so that it fi ts into the rear hole of the speaker as
in the fi gure.
2. Turn the wall mount counter clockwise to fi x it. (This is the reverse
direction to the cradle stand.)
3. Put the hole cover on the hole of the speaker.
1
2
3
To Next Page
Loading...
