Samsung HT-TZ315 - Connections; Speaker Placement and Connection Guide

3-2 Samsung Electronics
Disassembly & Reassembly
No. Part Name Description Description Photo
2 MECHA 1) Remove the mecha.
Remove the 4 screws and wire.
: TAP TITE SCREW BH 3*25 SILVER
3 CABINET
FRONT
1) Remove the wires connected to the
cabinet front.
In case of pulling up the PCB cable,
it is easier to pull up when pressing
the grip.
2) Lift and pull out the cabinet front.
4 PCB 1) Remove the wires between PCBs.
In case of pulling up the PCB cable,
it is easier to pull up when pressing
the grip.
2) Remove the 8 screws on the PCBs.
: TAP TITE SCREW BH 3*6 SILVER