Samsung HW-A650 - Page 50

NOTES
• If you use a device that uses the same frequency (5.8GHz) as
the Sound bar near the Soundbar, interference may cause some
sound interruption.
• The maximum transmission distance of the main unit's wireless
signal is about 32.8 ft (10 m), but may vary depending on your
operating environment.
04 CONNECTING WITH A
CABLE
• o----•--
Optical Cable
HDMI Cable (not supplied)
■ ---1 C
Bottom of the Sound bar
TV/BD/
DVD player/ Set -top
box/ Game console
■ -fi-1 I
TV Bottom of the Sound bar
External Device
■ -fi
• -fi--
TV Bottom of the Soundbar
NOTES
D.IN
mode
TVARC
mode
HDMI
mode
• If TV sound is inaudible, press the <g] (Source) button on the
remote control or on the top of the Sound bar to switch to " D.IN"
mode. The screen displays "D. IN " and " TV AR C" in sequence, and
TV sound is played.
• The recommended cable is High Speed HDMI Cable with
Ethernet.
• When you use an optical cable and the terminals have covers, be
sure to remove the covers.
05 CONNECTING WIRELESS LY
Connecting a TV or Bluetooth Device via
Bluetooth
Top of the Sound bar
OR
.. *··
OR
D
What is the difference between BT READY and BT
PAIRING?
• BT READY : In this mode, you can search for previously
connected TVs or connect a previously connected mobile device
to the Soundbar.
• BT PAIRING : In this mode, you can connect a new device to
the Sound bar. (Press the* PAIR button on the remote control
or press and hold the <g] (Source) button on the top of the
Soundbar for more than 5 seconds while the Sound bar is in "B T"
mode.)
NOTE
• If asked for a PIN code when connecting a Bluetooth device,
enter <0000>.
Bluetooth Multi connection
The Sound bar can be connected to 2 Bluetooth devices at the same
time.
Bluetooth device A Bluetooth device B
• Play music from one of the connected Bluetooth devices while
two devices are connected .