EasyManua.ls Logo

Samsung HW-Q700D - Page 5

Samsung HW-Q700D
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using the SpaceFit Sound
This function analyzes the users listening space with the
Soundbar’s microphone and provide optimal sound for the
space. Sound optimization proceeds automatically.
05USING A WIRELESS
CONNECTION
Connecting via Bluetooth
OR
OR
Top of the Soundbar
5sec
BT PAIRING
Search for the Bluetooth device on your TV or mobile
device.
What is the difference between BT READY and BT
PAIRING?
BT READY : In this mode, you can reconnect any
Samsung TV or mobile device that was connected
before.
BT PAIRING : In this mode, you can connect a new device
to the Soundbar.
(Press the
PAIR button on the Soundbar remote
control or press and hold the
(Mic On/Off) button on
the top of the Soundbar for more than 5 seconds while
the Soundbar is in “BT” mode.)
NOTE
Ã˙ɇϑʪʒ˙ͱθɇťÃĘʀͱʒʪи˵ʪʀͱʪʀϩ˝ɇ9Їʪϩͱͱϩ˵
device, enter <0000>.
Connecting via Wi-Fi (Wireless
Network)
To connect a Soundbar to a mobile device via a wireless
ʪϩиͱθ࣍Ǯࣗ࣎ࡡϩ˵ʪSmartThings app is required.
1. Connect your mobile device (smartphone, tablet, etc.) to
ϩ˵ʪǮࣗʪϩиͱθϩ˵ʪƟǤϑʀͱʪʀϩʪʒϩͱ
2. Install and launch the SmartThings app on your mobile
device (smartphone, tablet, etc.).
3. Follow the instructions in the app screen on the mobile
ʒʪЭʀʪϩͱʀͱʪʀϩϩ˵ʪƊͱЇʒɵɇθϩͱцͱЇθǮࣗʪϩиͱθࢋ
06TROUBLESHOOTING
Refer to the instructions below if this product does not
function properly. If the problem you are experiencing is
not listed below or if the instructions below do not help,
turn off the product, disconnect the power cord, and
contact Samsung Electronics at 1-800-SAMSUNG (1-800-
726-7864).
Soundbar does not turn on.
A˵ʪʀи˵ʪϩ˵ʪθϩ˵ʪΧͱиʪθʀͱθʒͱ˙ϩ˵ʪƊͱЇʒɵɇθϑ
correctly inserted into the outlet.
When the subwoofer or surround sound speakers are not
automatically connected
1. Turn off the Soundbar main unit.
2. Press and hold ID SET on the rear of the subwoofer
ɇʒϑЇθθͱЇʒϑΧʪɇʪθϑ˙ͱθɇϩʪɇϑϩߦϑʪʀͱʒϑࢋ
Ɵ˵ʪϑЇθθͱЇʒϑΧʪɇʪθϑɇцͱϩɵʪΧθͱЭʒʪʒࡡ
depending on the model.
Subwoofer
Rear of Subwoofer
"Blinking blue fast"
5sec
Surround Speaker (HW-Q930D only)
Rear of the Left and Right
Surround Speakers
"Blinking blue fast"
5sec
3. Press the Up button on the remote control for
5seconds.
OUN
PAIR
5sec
ID SET
4. A˵ʪʀ˙ϩ˵ʪøÃĘçøkUϑϑͱʒɵЇʪ࣍ʀͱʪʀϩͱ
complete).
Ɵ˵ʪøÃĘçøkUʒʀɇϩͱθϑϩͱΧϑɵ˝ɇʒ˝ͱиϑ
a solid blue when a connection is established
between the Soundbar and the Subwoofer,
ϑЇθθͱЇʒϑΧʪɇʪθϑࢋ

Table of Contents

Other manuals for Samsung HW-Q700D

Related product manuals