Samsung HW-S800B - Using the Remote Control; Remote Control Functions Overview

SAMSUNG
01 USING THE REMOTE CONTROL
For battery recycling go to
call2recycle.org; or call
1-800- 822-8837
II Power
[- _C_y_a_n _B-lin_k_s_X_l ....,)
y
0 0 e O 0
On
[ Red Blinks X3 )
___ v
0 0 e O 0
Off
II ~ (Source)
Press to select a source connected to the
Sound bar.
II Up/Down/Left/Right
II MI (Play I Pause)
Ii ~(Mute)
II
SOUND MODE
By pressing the button, you can select
the desired audio mode .
(] •l) "Surround" ➔ "Game" ➔ "Standard"
➔ "Adaptive sound" ➔
"DTS Virtual:X"
11 i onto)
Press the button to display information
about the current function.
When connected to Dolby Atmos®, the
LED indicator blinks cyan 3 times.
II VOLUME
II
Volume Up
( White moves to leB-J
0 0 0 0 e
Volume Down
WOOFER (BASS) LEVEL
Push the button up or down to adjust the
level of the woofer (bass).
m
m
CH LEVEL
By pressing the button, you can adjust
the volume of the each speaker.
0 0 e O 0
(] >l) "Center Level" ➔ "Front Top Level"
TONE CONTROL
By pressing the button, you can adjust
the volume of the treble or bass sound.
The defired item can be adjusted using
the Up/Down buttons.
White Blinks Xl
0 0 e O 0
(] •l) "Treble" ➔ "Bass"
m t Bluetooth PAIR
Switch the Soundbarto Bluetooth pairing
mode.
Red ➔ Green ➔ Blue Blinks
0
Pairing
Cyan Blinks X3 )
Y-
o O e O 0
Connection is complete
(] •>) "Ready to connect via Bluetooth."
m @ (Sound Control)
m
By pressing the button, you can set the
audio function. The desired settings can
be adjusted using the Up/Down buttons.
Each time the mode changes, the
Multicolor LED blinks in white.
(] >>) "Spacefit sound" ➔ "Active Voice
Amplifier" ➔ "Voice enhance" ➔
"Night mode" ➔ "Sync" ➔ "Virtual"
USB port (C-type) for charging
The LED lights while charging. When
fully charged, the LED turns off.
• The USB Cable is not provided.
• When the remote control does not
work due to low battery, charge it by
using the USB-C type port.