Shooting options
46
Using the timer
Pose for your photo while the AF-assist light/timer lamp
6
is blinking.
The AF-assist light/timer lamp will stop blinking just before the t
camera automatically takes a photo.
The motion timer may not work when:
you are more than 3 m away from the camera
t
your movements are too subtle
t
there is too much light or backlight
t
Using the motion timer
1
In Shooting mode, press [
t
].
Select
2
.
Press [
3
Shutter].
Stand within 3 m from the camera within 6 seconds after
4
pressing [Shutter].
Make a motion, such as waving your arms, to activate
5
the timer.
The AF-assist light/timer lamp will start to blink rapidly when t
the camera detects you.
The detection range of the motion timer
To Next Page
Loading...
