5
Assemble Your Device
Getting Started
Install a Memory Card
You can install an optional microSD
™
or
microSDHC
™
memory card (not included) to add
more memory space to your device.
Note: A memory card can be installed at any time.
Itis not necessary to install it prior to using the device.
1. Remove the back cover. For more information,
see Remove the Back Cover.
2. Slide the memory card into the slot with the gold
contacts facing down.
3. Replace the back cover. For more information,
see Replace the Back Cover.
Install the Battery
The battery is installed in the back of the device.
1. Insert the battery into the opening on the back of
the device, making sure the connectors align.
2. Gently press down to secure the battery.
Replace the Back Cover
The back cover should be replaced before using
thedevice.
1. Place the back cover onto the back of the device
and press down.
2. Press along the edge of the back cover until you
have a secure seal.
Charge the Battery
Your device is powered by a rechargeable, standard
Li-Ion battery. A USB charger (charging head and
USB cable) is included with the device for charging
the battery from any standard outlet.
The battery comes partially charged. A fully
discharged battery requires up to four hours of
charge time. You can use the device while charging.
Note: It is recommended you fully charge the battery
before using your device for the first time.
Caution: Use only charging devices and batteries
approved by Samsung. Samsung accessories are
designed for your device to maximize battery life.
Using other accessories may invalidate your warranty
and may cause damage.
To Next Page
Loading...
