Quick-Start Guide 9
Quick-Start Guide
Making Your First Call:
1. When you open your Jitterbug, you will hear a dial tone to indicate that service
is available. If service is not available, there will be no dial tone and you will
see “No Service” on the Inside Display.
2. Dial the full ten-digit number using your keypad. You may be required to dial
the number “1” rst before placing a call in some areas.
3. Press the button to place the call when you are nished dialing.
If you accidentally press a wrong button, press the button to back up and delete
the last number.
NOTE:
To Next Page
Loading...
