Need help?Do you have a question about the Samsung KXWD Series and is the answer not in the manual?
Highlights critical warnings for installation and product safety.
Details on compatible indoor and outdoor unit combinations for system design.
Instructions and precautions for safely moving the outdoor unit during installation.
Guidelines for choosing a suitable installation site considering ventilation, weight, and environmental factors.
Specifies minimum clearance for installation, service, and airflow.
Defines space requirements for a single outdoor unit installation.
Details on space clearance needed when installing two outdoor units together.
Lists and describes optional components required for pipe connections.
Instructions on securely fixing the outdoor unit to the base ground.
Guidance for installing drain pipes in module configurations.
General guidelines and precautions for refrigerant piping.
Selection criteria for refrigerant pipes based on capacity and connection type.
Specifies maximum allowable pipe lengths and provides installation diagrams.
Details on connecting branch joints between outdoor units.
Overview of MCU models and their connectable indoor unit capacities.
Guidance on connecting indoor units to the MCU based on capacity.
Details on required circuit breakers and power cable specifications.
Diagrams illustrating the power wiring connections for different systems.
Instructions for correctly connecting power cables to terminal boards.
Procedure for performing an air tightness test using nitrogen gas.
Steps for vacuum drying refrigerant pipes and indoor units.
Guidelines for insulating refrigerant pipes and joints to prevent condensation.
Instructions for insulating pipes within the outdoor unit.
Procedure for collecting refrigerant into a container before pump down.
Steps for charging refrigerant in module installations.
Explanation of segment display patterns during initial power input and operation.
Procedure to set the number of connected indoor units using DIP switches.
Details on operating the unit using tact switches for various functions.
Guide to entering and using the outdoor unit's option setting and view modes.
Specifies design conditions for circulating water, including temperature and quality standards.
Explanation and wiring for the 2-way solenoid valve for system efficiency.
Instructions on connecting and setting the variable flow control valve.
A checklist of critical items to verify after installation is complete.
Procedure and precautions for performing the auto trial operation.
Troubleshooting steps for E503 errors related to valves and refrigerant.
Troubleshooting steps for E505 and E506 errors related to pressure sensors.
Guide to using the function that detects the system's refrigerant amount.
Important precautions for water quality and flow management before operation.
Guidelines for maintaining the plate type heat exchanger, including cleaning procedures.
Defines cooling water quality standards and inspection frequency.
Mandatory checklist for anti-freeze usage in ground heat exchangers.
A checklist for installers to record installation details.
Installer's checklist covering distribution, outdoor unit, water system, and trial operation.
General| Refrigerant | R410A |
|---|---|
| Cooling Capacity | Varies by model |
| Heating Capacity | Varies by model |
| Energy Efficiency Ratio (EER) | Varies by model |
| Coefficient of Performance (COP) | Varies by model |
| Air Flow (Indoor) | Varies by model |
| Air Flow (Outdoor) | Varies by model |
| Dimensions (Indoor Unit) | Varies by model |
| Dimensions (Outdoor Unit) | Varies by model |
| Weight (Indoor Unit) | Varies by model |
| Weight (Outdoor Unit) | Varies by model |
To Next Page