What to do if my Samsung LDD1PA2DU24 does not start?
If your Samsung Washer isn't starting, check the following: ensure the washer is plugged in, the door is properly closed, and the faucets are open. Press the START/PAUSE button. Verify that Child Lock is not activated. Note that the washer will make clicking noises and do a quick drain before filling. Check the fuse or reset the circuit breaker.
Why is there no water coming into my Samsung LDD1PA2DU24?
If your Samsung Washer isn't getting enough water, ensure the faucet is fully open and the door is properly closed. Check that the water supply hose isn't frozen, kinked, or clogged, and make sure there is sufficient water pressure.
Why is detergent left in the drawer of my Samsung LDD1PA2DU24 after a cycle?
If detergent remains in the detergent drawer of your Samsung Washer after a cycle, make sure the washer is running with sufficient water pressure. Ensure the detergent is added to the center of the drawer, and the rinse cap is properly inserted. If using granular detergent, the detergent selector should be in the upper position. You may also need to remove the rinse cap and clean the detergent drawer.
Why is my Samsung Washer showing a water supply error?
A water supply error on your Samsung Washer can occur for several reasons. Foreign material might be blocking the water supply valve, or the water supply valve terminal might be disconnected. Also, the warm water and rinse connectors could be incorrectly connected. Another cause can be a disconnected PCB terminal from the drain hose to the detergent drawer, or a folded or torn transparent hose. To resolve this, ensure the water supply valve is clear, check the connection of the water supply valve terminal, verify the connections of warm water and rinse connectors, and ensure all connections are correct and hoses are intact.
Why is my Samsung Washer vibrating so much?
Excessive vibrations or noise from your Samsung Washer can occur for several reasons. Ensure the washer is installed on a level, solid, and non-slippery floor, adjusting the leveling feet if necessary. Remove the shipping bolts, and confirm the washer isn't touching anything else. Balance the laundry load. Also, noises can be caused by the motor during regular operation, metal objects like coins, or metal decorations on clothing.
What causes a motor driving error on my Samsung Washer?
A motor driving error in your Samsung Washer can stem from various causes that restrain revolutions. The PBA connector terminal or the motor spin net may not be engaged. The motor’s internal coil could be damaged, or the hall sensor terminal might be disconnected. Foreign material inside the motor, overloading due to too much laundry, a faulty PBA, a weak motor driving error from the PBA, erroneous signals from the motor hall sensor, a disconnected IPM terminal on the main PBA, a DD motor cover out of place, a disconnected PCB housing terminal, or a DD motor fault could also be responsible. This error occurs because of restrained revolutions.
Understanding essential safety guidelines and symbols for safe operation.
Essential precautions to reduce risk of fire, shock, and injury.
Warnings regarding installation, usage, proposition 65, and cautions.
Detailed instructions for setting up the washer from location to power on.
Explanation of the washer's control panel layout and buttons.
Instructions on starting, pausing, and changing wash cycles.
Table of frequent issues and their recommended fixes.
Explanations of error codes and how to resolve them.
General| Category | Washer |
|---|---|
| Brand | Samsung |
| Model | LDD1PA2DU24 Series |
| Type | Front Load |
| Energy Rating | A+++ |
| Spin Speed | 1400 RPM |
| Color | White |
| Digital Inverter Technology | Yes |
| Eco Bubble Technology | Yes |
| Self Clean+ | Yes |
| AddWash | Yes |
| Wi-Fi Enabled | Yes |
| Smart Control | Yes |
| Dimensions (WxDxH) | 600 x 600 x 850 mm |
To Next Page