10 Operating Instructions and Installation
10-2
10-2 Rear
1. POWER
Power terminal
Connect the power cord for your monitor to the
POWER on the back of the monitor.
This product may be used with 100 ~ 240VAC
(+/- 10%).
2.DVI/PC IN
1) DVI(HDCP)
: Connect the DVI cable to the DVI(HDCP) port
on the back of your monitor.
2) RGB
: Connect the signal cable to the RGB port on
the back of your monitor.
3) AUDIO
: PC sound terminal (input)
To Next Page
Loading...
