4-5
4. Troubleshooting
4-1-3. No Video (HDMI - Digital Signal)
Symptom Audio is normal but no picture is displayed on the screen.-
Major
checkpoints
Check the HDMI source
Check the SEMS01
This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected.
-
-
-
Diagnostics
Power Indicator is off.
Lamp on, no video.
No
Check the connection
of HDMI cable?
Check a IC5001.
Change a main PCB ass’y.
No
Does the digital data appear at the No
output of LVDS (RA5012~14)?
No
Please, Contact Tech support
Check the LVDS cable?
Replace the LCD panel?
Yes
Input a HDMI cable.
Yes
Yes
3
1
Caution Make sure to disconnect the power before working on the SMPS/IP.
To Next Page
Loading...
