◀ ▶
●
Alternative❑Software❑(backup)
for LCD 450 series and above
: If there is an issue
with the new firmware and it is affecting operation, you can change the
software to the previous version.
If the software was changed, existing software is displayed.
●
Standby❑Mode❑Upgrade❑(Off❑/❑1❑hour❑later❑/❑2❑hours❑later/❑00:00❑/❑
02:00❑/❑12:00❑/❑14:00)❑
for LCD 450 series and above
: A manual upgrade will be
automatically performed at selected time. Since the power of the unit is
turned on internally, the screen may be turned on slightly for the product. This
phenomenon may continue for more than 1 hour until the software upgrade is
complete.
English
To Next Page
Loading...
