◀ ▶
Issues Solutions❑and❑Explanations
When changing
channels, the picture
freezes or is distorted
or delayed.
●
If connected with a cable box, please try to reset the
cable box. Reconnect the AC cord and wait until the
cable box reboots. It may take up to 20 minutes.
●
Set the output resolution of the cable box to 1080i or
720p.
Sound Quality First of all, please perform the Sound❑Test to confirm
that your TV audio is properly operating. (go to MENU -
Support❑-❑Self❑Diagnosis❑-❑Sound❑Test)
If the audio is OK, the sound problem may caused by the
source or signal.
There is no sound or
the sound is too low
at maximum volume.
●
Please check the volume of the device (Cable/Sat Box,
DVD, Blu-ray etc) connected to your TV.
English
To Next Page
Loading...
