◀ ▶
Issues Solutions❑and❑Explanations
The cable/set top box
remote control doesn’t
turn the TV on or off,
or adjust the volume.
●
Programme the Cable/Set top box remote control to
operate the TV. Refer to the Cable/Set user manual for
the SAMSUNG TV code.
A “Mode❑Not❑
Supported” message
appears.
●
Check the supported resolution of the TV, and adjust the
external device’s output resolution accordingly.
There is a plastic smell
from the TV.
●
This smell is normal and will dissipate over time.
The TV Signal❑
Information is
unavailable in the Self❑
Diagnosis Test menu.
●
This function is only available with digital channels from
an Antenna / RF / Coax connection.
English
To Next Page
Loading...
