◀ ▶
When❑Antenna❑Source❑is❑set❑to❑Air❑or❑Cable:
When selecting Cable❑
→
❑Digital❑&❑Analogue❑or❑Digital: Provide a value to
scan for cable channels.
–
Search❑Mode (Full❑/❑Network❑/❑Quick): Scans for all channels with active
broadcast stations and stores them in the TV.
If you select Quick, you can set up the Network,❑Network❑ID,❑
Frequency,❑Modulation and Symbol❑Rate manually by pressing the
button on the remote control.
–
Network (Auto❑/❑Manual): Selects the Network❑ID setting mode among
Auto or Manual.
–
Network❑ID: When Network is Manual, you can set up Network❑ID using
the numeric buttons.
English
To Next Page
Loading...
