◀ ▶
Upper❑LNB❑Oscillators: Sets the LNB oscillators to a higher frequency.
Tone❑22❑kHz❑(Off❑/❑On❑/❑Auto): Selects the Tone 22 kHz depending on the
LNB type. For a universal LNB it should be Auto.
Signal❑Quality: Display the current status of broadcasting signal.
●
SatCR/Unicable❑Settings
It is available when LNB Power is set to On.
During using this function, the sound will be mute temporarily.
SatCR/Unicable❑Settings(On❑/❑Off): Enable or disable single cable installation
support.
Slot❑Number: Select the SatCR user slot number for this receiver. Choose it
in the range of 1 to 8.
English
To Next Page
Loading...
