◀ ▶
User❑Mode: Sets the position of satellite antenna according to each satellite.
If you store the current position of satellite antenna according to a certain
satellite, when the signal of that satellite is needed, the satellite antenna can
be moved to pre-populated position.
–
Satellite: Selects the satellite to set the position for.
–
Transponder: Selects a transponder from the list for signal reception.
–
Moving❑Mode: Selects the movement mode between discrete and
continuous movement.
–
Step❑Size: Adjusts the step size degrees for the antenna rotation. Step
Size is available when Moving Mode is set to Step.
–
Go❑to❑Stored❑Position: Rotates the antenna to the stored satellite
position.
English
To Next Page
Loading...
