◀ ▶
❑
■
Network❑Setup❑(Auto)
Use the Automatic Network Setup when connecting your TV to a network that
supports DHCP. To set up your TV’s cable network connection automatically,
follow these steps:
How❑to❑set❑up❑automatically
1. Go to Network❑Settings screen. To enter it, follow the directions of Network❑
Settings.
2. Select the Wired.
3. The network connection screen
appears, and network setting is
done.
U
Move
E
Enter
e
Exit
Network❑Settings
Select❑a❑network❑connection❑type.
Wired
Wireless
(general)
WPS(PBC)
One❑Foot
Connection
Connect❑to❑the❑network❑using❑a❑LAN❑cable.❑
Please❑make❑sure❑that❑the❑LAN❑cable❑is❑
connected.
English
To Next Page
Loading...
