English - 18
You can select the picture size which best corresponds to
your viewing requirements.
1. Press
the MENU button to display the menu.
Press the ENTER/OK button, to select "Picture".
2. Press
the
▲
or
▼
button to select "Size", then press the
ENTER/OK button.
3. Select the required option by pressing the
▲
or
▼
button.
Press the ENTER/OK button.
4. Press the EXIT
button to exit.
"Auto Wide" function is available only in "TV", "Ext.", "AV",
"S-Video" and "DTV" mode.
In PC Mode, only "Wide" and "4:3" mode can be adjusted.
Zoom : Select by pressing the
◄
or
►
button.
Use the
▲
or
▼
button to move the picture up and
down. After selecting , use the
▲
or
▼
button to
magnify or reduce the picture size in the vertical
direction.
Wide Zoom : Move the screen up/down using the
▲
or
▼
buttons after selecting the by pressing the
►
or ENTER/OK button.
Changing the Picture Size
You can select these options
by simply pressing the P.SIZE
button on the remote control.
Size
Auto Wide
Wide
1
6 : 9
Wide Zoom
Zoom
4
: 3
Just Scan
Move Enter Return
TV
Picture
Mode : Dynamic
Contrast 100
Brightness
45
Sharpness
75
Colour
55
T
int G 50 R 50
Colour Tone : Cool1
Detailed Settings
Backlight
: 10
Size
: Auto Wide
Screen Mode
: 16 : 9
More
TV
Move Enter Return
Auto Wide: Automatically adjusts the picture size to the "16:9"
aspect ratio.
Wide: Adjusts
the picture size to 16:10 appropriate for DVDs or
wide broadcasting.
16:9: Adjusts
the picture size to 16:9 appropriate for DVDs or
wide broadcasting.
Wide Zoom: Magnify the size of the picture more than 4:3.
Zoom: Magnifies
the 16:9 wide picture (in the vertical direction)
to fit the screen size.
4:3: This
is the default setting for a video movie or normal
broadcasting.
Just Scan: Displays
the input scenes as they are without any
cutoff when HDMI 720p,1080i signals are input.
To Next Page
Loading...
