Samsung LE32A676A1M - Configuring Picture Options

English - 27
Conguring Picture Options
Activating Picture Options
1.
Press the MENU button to display the menu.
Press the ENTER button to select “Picture”.
2. Pressthe▲or▼buttontoselect“PictureOptions”,thenpressthe
ENTER button.
Pressthe▲or▼buttontoselectaparticularitem.PresstheENTER
button.
Whenyouaresatisedwithyoursetting,presstheENTER button.
InPCmode,youcanonlymakechangestothe“ColourTone”and“Size”
fromamongtheitemsin“PictureOptions”.
Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
You can select the most comfortable colour tone to your eyes.
Theadjustedvaluesarestoredaccordingtotheselected“Picture”mode.
“Warm1”or“Warm2”isonlyactivatedwhenthepicturemodeis“Movie”.
Size: Auto Wide/16:9/Wide Zoom/Zoom/4:3/Just Scan
Youcanselectthepicturesizewhichbestcorrespondstoyourviewing
requirements.
Auto Wide:Automaticallyadjuststhepicturesizetothe“16:9”aspectratio.
16:9:Adjuststhepicturesizeto16:9appropriateforDVDsorwidebroadcasting.
Wide Zoom:Magnifythesizeofthepicturemorethan4:3.
Zoom:Magniesthe16:9widepicture(intheverticaldirection)totthescreensize.
4:3:Thisisthedefaultsettingforavideomovieornormalbroadcasting.
Just Scan:UsethefunctiontoseethefullimagewithoutanycutoffwhenHDMI(720p/1080i/1080p)orComponent
(1080i/1080p)signalsareinput.
•
•
•
•
•
•
“AutoWide”functionisavailableonlyin“TV”,“Ext.1”,“Ext.2”,“AV”,and“S-Video”mode.
InPCMode,only“16:9”and“4:3”modecanbeadjusted.
SettingscanbeadjustedandstoredforeachexternaldeviceyouhaveconnectedtoaninputoftheTV.
Temporaryimageretentionmayoccurwhenviewingastaticimageonthesetformorethantwohours.
“WideZoom”:Pressthe►buttontoSelect“Position”,thenpresstheENTER button.Pressthe▲or▼button
tomovethescreenup/down.ThenpresstheENTER button.
“Zoom”:Pressthe►buttontoSelect“Position”,thenpresstheENTER button.Pressthe▲or▼buttonto
movethepictureupanddown.ThenpresstheENTER button.Pressthe►buttontoSelect“Size”,thenpress
the ENTER button.Pressthe▲or▼buttontomagnifyorreducethepicturesizeintheverticaldirection.Then
press the ENTER button.
WhenDouble( , )modehasbeensetinPIP,thePictureSizecannotbeset.
After selecting “Just Scan” in HDMI (1080i/1080p) or Component (1080i/1080p) mode:
Select“Position”bypressingthe◄or►button.Usethe▲,▼,◄or►buttontomovethepicture.
Reset:Pressthe◄or►buttontoselect“Reset”,thenpresstheENTER button.Youcaninitializethesetting.
Ifyouusethe“JustScan”functionwithHDMI720pinput,1linewillbecutatthetop,bottom,leftandrightasinthe
overscanfunction.
Youcanselecttheseoptionsbysimplypressingthe P.SIZE button on the
remote control.
Screen Mode: 16:9/Wide Zoom/Zoom/4:3
Whensettingthepicturesizeto“AutoWide”ina16:9wideTV,youcandeterminethepicturesizeyouwanttoseethe
4:3WSS(WideScreenService)imageornothing.EachindividualEuropeancountryrequiresdifferentpicturesizeso
this function is intended for users to select it.
16:9:Setsthepictureto16:9widemode.
Wide Zoom:Magnifythesizeofthepicturemorethan4:3.
Zoom:Magnifythesizeofthepictureverticallyonscreen.
4:3:Setsthepictureto4:3normalmode.
•
•
•
•
Thisfunctionisavailablein“AutoWide”mode.
Thisfunctionisnotavailablein“PC”,“Component”or“HDMI”mode.
➣
➣
➣

➣
➣

➣
➣
➣
➣
➣
➣
➣
➣
➣
O

➣
➣
Tint(G/R) :G50/R50
DetailedSettings
Picture Options ►
PictureReset
Picture
PictureOptions
ColourTone :Normal ►
Size :AutoWide
ScreenMode :16:9
DigitalNR :Auto
DNle :Off
HDMIBlackLevel :Medium
100HzMotionPlus :Medium
▼
ReturnEnter
Move
1_BN68-01412J-Eng.indd 27 2008-04-29 ¿ÀÈÄ 3:47:42