4-36
4. Troubleshooting
4-7. EDID Self-Write Method
1. OSD in case of entering Factory : It’s displayed to check if Self write runs normally.
L13_1366_768 SUCCESS
HDMI Version
13 : HDMI 1.3
12 : HDMI 1.2
Product
L : LCD-TV
P : PDP-TV
PANEL highest resolution Failure : Even Self write one port failure
Success : Self write all port success
In case Failure occurs!
ex) L13_1366_768 FAILURE_A1_H1_H2_H3_H4
Write Failed one.
Above shows all from analog , HDMI1~HDMI4 are failed.
As L450 and lower groups support only HDMI 1.2 version, only 1.2 version
can be displayed.
L550 and more groups support HDMI 1.3 version & 1.2 version. So, 1.3
version can be displayed in factory outgoing condition.
…In case HDMI_1 Port changes into HDMI 1.2 version due to service
request, HDMI 1.2 version can be displayed.
However, be aware other Ports are HDMI 1.3 version.
Before change : L13_1366_768 SUCCESS
After change : L12_1366_768 SUCCESS
2. In case of entering Option Table(Service) : Check Panel Inch & Model Option list in ATV-Micom, and decide
HDMI Port qty that needs self write.
Panel Inch : 40"
Model Option : Tanzanite
All project names that will be introduced in 2008 mentioned
All inches that will be introduced in 2008 mentioned
LCD-TV Model Option Panel Inch
Amber small size 19",22"
Ruby 40",46",52"
Diamond 46",55"
Spinel 50"
Topaz 50",58",63"
To Next Page
Loading...
