EasyManua.ls Logo

Samsung LE40C652 - Anynet+ Setup and Operation; Setting Up Anynet+ Features; Switching Anynet+ Devices; Recording TV Programmes

Samsung LE40C652
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
English
04 Advanced Features
Setting Up Anynet ¦
+
Setup
Anynet
+
(HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet
+
(HDMI-CEC) must be set to On.
When the
Anynet
+
(HDMI-CEC) function is disabled, all the Anynet
+
related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet
+
Device to turn off automatically when the TV is turned off.
Auto Turn Off
is set to Yes, running external devices will turn off at the same time as the TV powers off. However,
a device may not turn off if recording is in progress.
May not be enabled depending on the device.
Switching between Anynet ¦
+
Devices
1. Anynet
+
devices connected to the TV are listed.
If you cannot find a device you want, press the red button to refresh the list.
2. Select a device and press the ENTER
E
button. You can switch to the selected device.
Only when you set
Anynet
+
(HDMI-CEC) to On in the Application menu, the Device List menu appears.
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
x
operation.
If you have selected external input mode by pressing the
x
SOURCE button, you cannot use the Anynet
+
function.
Make sure to switch to an Anynet
+
device by using the Device List.
Recording ¦
You can make a recording of a TV programme using a Samsung recorder.
1. Select Recording.
When there are more than two recording devices
When multiple recording devices are connected, the recording devices are listed. Select one recording device in
x
the Device List.
When the recording device is not displayed, select
Device List and press the Red button to search devices.
2. Press the EXIT button to exit.
You can record the source streams by selecting
Recording: (device_name).
Pressing the
(REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device’s users manual.
[LC650-XH]BN68-02558P.indb 37 2010-09-30 �� 7:00:47

Related product manuals