EasyManua.ls Logo

Samsung LE40N8 - Updating the Channel List Automatically; Updating the Channel List Manually

Samsung LE40N8
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English - 33
Updating the Channel List Automatically
You can update the channel list when the broadcaster
adds new Services or if you move the TV to a new
location.
1. Press the D.MENU button to display the DTV menu.
2. Press the
or
button to select "Channel", then press
the ENTER/OK button.
3.
Press the ENTER/OK button again, to select "Auto Store".
4.
Press the or button to select "Auto", "Cable" or "Aerial".
Press the ENTER/OK button.
Auto: Scans channels automatically.
Cable: Scans cable channels.
Aerial: Scans aerial channels.
This product cannot scan both cable and aerial
channels at the same time.
5.
When it has finished, the number of scanned services will
be displayed.
The existing favourite channel list will not be deleted
when the channel list is updated.
To stop the scan before it has finished, press the ENTER/OK button with "STOP" selected.
6. Press the EXIT button to exit.
If the signal status is poor, the "No Service found! Check the aerial connection" message is
displayed.
Updating the Channel List Manually
You can specify the channel for a fast channel search.
1. Press the D.MENU button to display the DTV menu.
2. Press the
or
button to select "Channel", then press
the ENTER/OK button.
3.
Press the
or
button to select "Manual Store", then
press the ENTER/OK button.
4.
Press the
or
button to select "Cable", then press
the ENTER/OK button.
Frequency: Displays the frequency for the channel.
(Differs in each country)
Modulation: Displays available modulation values.
Symbol rate: Displays available symbol rates.
5.
Press the
or
button to select "Aerial", then press
the ENTER/OK button.
Channel: Channel "21" to "69" in sequence are
displayed (depending on the country)
Frequency: The frequency available in the Channel
group is displayed.
Bandwidth: The available bandwidths are 8 MHz.
6.
When it has finished, the number of scanned services will
be displayed.
7. Press the EXIT button to exit.
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Auto Store
Move Enter Return
Choose system to scan
Auto
Cable
Aerial
Channel
65
KHz
Frequency Bandwidth
MHz
Adjust Return
Manual Store
474000 8
Search
Move Enter Return
Manual Store
Move Enter Return
Choose system to scan
Cable
Aerial
Manual Store
Frequency 114000
Search
KHz
Modulation 64QAM
Symbol rate 6900 kS/s
0 .. 9
Enter freq. Move Return
Mode : Custom
Equalizer
SRS TS XT : Off
Auto Volume : Off
Internal Mute : Off
Reset
Auto Store
Scanning for cable digital services...
Services found: 24 Frequency: 114000
35%
Stop
Return
Move Enter Return
Auto Store
Move Enter Return
Choose system to scan
Auto
Cable
Aerial
BN68-01186N-01Eng-0510.indd 33 2007-05-13 �� 4:37:57

Table of Contents

Related product manuals