●
SatCR/Unicable Settings: Configure single cable installation.
N
SatCR is short for satellite channel router.
N
This function may not support depending on the country.
SatCR/Unicable: Enables or disable single cable installation support.
●
Positioner Settings: Configures the aerial positioner.
N
It is available when LNB Power is set to On.
Positioner: Enables or disables the positioned control.
Positioner Type: Sets the positioned type between DiSEqC 1.2 and
USALS(Universal Satellite Automatic Location System).
–
My Longitude: Sets the longitude for my location.
–
My Latitude: Sets the latitude for my location.
–
Satellite Longitude Settings: Sets the longitude of user defined
satellites.
English
To Next Page
Loading...
