Installer Mode: Sets limits to the scope of movement of satellite aerial or
reset the position. Generally, installation guide uses this function.
–
Limit Position: Selects the direction of the positioner Limit.
–
Aerial Position: Adjusts and stores the aerial position for the selected
satellite.
–
Store Current Position: Stores the current position as the selected
positioner Limit.
–
Go to zero: Moves the aerial to the reference position.
–
Reset positioner limit: Allows the aerial to rotate over the full arc.
●
Reset all settings: All satellite settings will be reset to the initial values.
English
To Next Page
Loading...
