■
Manual Network Setup
Use the Manual Network Setup when connecting your TV to a network that
requires a Static IP address.
N
You can find the network connection values in control panel of Windows
computers.
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1.
Select the IP Settings on network connection screen.
N
When it fails to connect the network automatically, the IP Settings is
available to select.
2.
Set IP setting to Enter manually.
3.
Move to each field using
▲/▼/◄/►
buttons. Enter the network connection
values, and then select OK.
4.
The network connection screen appears, and network setting is done.
English
To Next Page
Loading...
