Connecting Antenna/Cable TV
1
Plug the antenna/cable TV lead into the ANT IN terminal on the back of the TV.
When connecting the RF cable to the antenna input terminal, keep the copper wire portion of
the RF cable straight to avoid bending it.
For more detailed antenna/cable TV connections, refer to the owner's Instructions.
Installing the stand
1
Lower the TV set in the direction of the arrow and fix the stand.
2
Use the four screws to tightly fix the stand.
21
BN68-00515V-00.qxd 1/11/05 4:10 PM Page 2
To Next Page
Loading...
